$2,147.00
Daniel Defense AMBUSH 6.8 KRYPTEK HIGHLANDER
SHARE THIS
Product Description
Daniel Defense AMBUSH 6.8 KRYPTEK HIGHLANDER
Accurate, tough, and hard-hitting, the Daniel Defense Ambush 6.8 Kryptek Highlander takes the best aspects of Daniel’s proven designs and tailor fit them to the modern sportsman. Built around an 18” Cold Hammer Forged barrel, the Ambush 6.8 features the modern SPEC II chamber dimensions to function safely with higher pressure loads. Shielding the barrel and mid-length gas system is the MFR 15.0 free-floating handguard. With a continuous picatinny rail on top and M-LOK attachment on the sides and bottom, there is plenty of room for any accessory that your hunt may require. The barrel is threaded in 5/8×24 TPI and capped with a knurled thread protector which can be easily removed should you want to attach a suppressor or other muzzle device. The Ambush 6.8 comes from the factory with a Geissele Super Semi-Automatic, 2-stage trigger and an ambidextrous safety selector. The new independently ambi GRIP-N-RIP Charging Handle accommodates left- and right-handed shooters and is engineered for suppressed fire, with anti-gas features that redirect gas flow upward and away from the face and operator. The platform is finished off in a vivid hydro-dipped Kryptek Highlander camo pattern. The rifle is finished off with the rugged and comfortable Daniel Defense Buttstock and Pistol Grip.
MATERIALS & CONSTRUCTION
- LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum
- UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum
- BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:11″ Twist, 18″ S2W Profile, Mid-Length Gas System, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
- GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel and Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement
- THREAD PROTECTOR: 12L14 Steel, Salt Bath Nitride Finished
- BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
- BUFFER: H Buffer
- SIGHTS: Sold Separately
- HANDGUARD: Daniel Defense MFR 15.0, CNC Machined of 6061-T6 Aluminum, M-LOK Attachment
- CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7076-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized
- RECEIVER EXTENSION: 6-Position Mil-Spec 7075-T6 Aluminum
- BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
- PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
- FINISH: Kryptek Highlander
- Made in the USA!
Accurate, tough, and hard-hitting, the Daniel Defense Ambush 6.8 Kryptek Highlander takes the best aspects of Daniel’s proven designs and tailor fit them to the modern sportsman. Built around an 18” Cold Hammer Forged barrel, the Ambush 6.8 features the modern SPEC II chamber dimensions to function safely with higher pressure loads. Shielding the barrel and mid-length gas system is the MFR 15.0 free-floating handguard. With a continuous picatinny rail on top and M-LOK attachment on the sides and bottom, there is plenty of room for any accessory that your hunt may require. The barrel is threaded in 5/8×24 TPI and capped with a knurled thread protector which can be easily removed should you want to attach a suppressor or other muzzle device. The Ambush 6.8 comes from the factory with a Geissele Super Semi-Automatic, 2-stage trigger and an ambidextrous safety selector. The new independently ambi GRIP-N-RIP Charging Handle accommodates left- and right-handed shooters and is engineered for suppressed fire, with anti-gas features that redirect gas flow upward and away from the face and operator. The platform is finished off in a vivid hydro-dipped Kryptek Highlander camo pattern. The rifle is finished off with the rugged and comfortable Daniel Defense Buttstock and Pistol Grip.
MATERIALS & CONSTRUCTION
- LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum
- UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum
- BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:11″ Twist, 18″ S2W Profile, Mid-Length Gas System, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
- GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel and Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement
- THREAD PROTECTOR: 12L14 Steel, Salt Bath Nitride Finished
- BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
- BUFFER: H Buffer
- SIGHTS: Sold Separately
- HANDGUARD: Daniel Defense MFR 15.0, CNC Machined of 6061-T6 Aluminum, M-LOK Attachment
- CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7076-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized
- RECEIVER EXTENSION: 6-Position Mil-Spec 7075-T6 Aluminum
- BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
- PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
- FINISH: Kryptek Highlander
- Made in the USA!
| Mounting System | M-LOK |
|---|---|
| Caliber | 6.8mm SPC |
| Muzzle Thread | 5⁄8×24 TPI (Threads Per Inch) |
| Gas System | Mid-length |
| Barrel Length | 18″ |
| Barrel Profile | S2W® [Strength-to-Weight] |
| Product Weight | 6.9 lbs |
| Length | 33 3/8″ – 37″ |
| Magazine | PRI- 5 Round |
| Case | Daniel Defense Full-Latch Impact Plastic Case |
| Manufacturer | Daniel Defense |
Only logged in customers who have purchased this product may leave a review.
Related products
-
Read more
Daniel Defense DDM4 V7 Pistol Law Tactical with 10.3 inch CHF Carbine LAW Tac Folder Milspec+
$2,397.00 -
Read more
Daniel Defense DDM4 V7 Pistol with 10.3 inch CHF Carbine Milspec+
$2,098.00 -
Read more
V7P 300 BLACKOUT MIL SPEC
$2,098.00 -
Read more
V7P 300 BLACKOUT PISTOL LAW TACTICAL MIL SPEC
$2,397.00
Reviews
There are no reviews yet.