$2,385.00
Out of stock
DANIEL DEFENSE MK18 PISTOL LAW TACTICAL is no longer manufactured by Daniel Defense. They have agreed to allow us to build this pistol. Go here to see this pistol that is available.
SHARE THIS
Product Description
Daniel Defense MK18 Pistol Law Tactical
The Daniel Defense MK18 Pistol, equipped with the SB-Tactical SOB Pistol Stabilizing Brace and LAW Tactical GEN3M folding stock adapter, is a variation of the MK18 SBR, which has been extremely popular within the Law Enforcement and Special Operations communities. This firearm is classified as a Pistol and not a Short Barreled Rifle (NFA regulated items require ATF approval and a tax stamp). The Daniel Defense MK18 Pistol features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3” Cold Hammer Forged Barrel, the same length commonly used for CQB operations. The MK18 RISII features the Bolt-Up System and has been rigorously tested prior to fielding by USSOCOM. This pistol comes equipped with the rugged and comfortable Daniel Defense Pistol Grip with an integral trigger guard and soft touch overmolding. The MK18 Pistol is unmatched in size, weight, and performance. There are many reasons to own a MK18 Pistol.
MATERIALS & CONSTRUCTION
- LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
- UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
- BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 10.3″ Govt Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
- GAS SYSTEM: Low Profile Gas Block CNC Machined of 4140 hardened steel with Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement
- MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
- BOLT CARRIER GROUP: M16 Profile, MP Tested, Chrome Lined, Properly Staked Gas Key
- BUFFER: H Buffer
- HANDGUARD: Daniel Defense MK18 RIS II, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized, FDE
- RECEIVER EXTENSION: AR Pistol Receiver Extension, Law Tactical GEN3M Folding Adapter
- BRACE: SB-Tactical SOB Pistol Stabilizing Brace
- PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
- RAIL PANELS: Daniel Defense Rail Panels made from Santoprene, heat resistant to 300° F.
- Made in the USA!
All Daniel Defense products carry a 100% satisfaction guarantee against defects in original materials and workmanship. If your Daniel Defense product shows evidence of such defects, Daniel Defense will make every accommodation to fix, repair, or replace your product in the most expeditious manner possible. Daniel Defense does not warranty products or damage caused to our products by the correct or incorrect installation of other manufacturer’s products. Be sure to retain your sales slip as proof of purchase date when making a claim.
Additional Information
Manufacturing # / SKU | 02-088-22038 |
---|---|
Restricted Shipping | Yes |
Caliber | 5.56mm NATO |
Muzzle Thread | 1⁄2×28 TPI (Threads Per Inch) |
Gas System | Carbine |
Barrel Length | 10.3″ |
Profile | Government |
Product Weight | 6.08 lbs |
Length | 30 1/4 |
Magazine | DD Magazine (32 Round) |
Case | Daniel Defense Full-Latch Impact Plastic Case |
Manufacturer | Daniel Defense |
1 review for DANIEL DEFENSE MK18 PISTOL LAW TACTICAL
Only logged in customers who have purchased this product may leave a review.
apdrmills (verified owner) – :
I think this is one of the best 10.3 ARs out there , ordered mine week ago already put maybe 200 rounds threw it , not one issue . Only complaint I have is the picture shows brown pistol grip mone was black so pictures may be a little off on what colors you actually get . Shipping was fast maybe 3 days . I would definitely order here again , I’d just double check the colors first .
Salisbury NC